Collectible Statues

What collectible statues are

A collectible statue is a sculpted figure of a character made to stand in one pose, usually on a base that's part of the design. It doesn't have joints. It isn't meant to be played with. You set it on a shelf and leave it there.

That last part is the whole appeal for a lot of people. A posed action figure drifts. A hand drops, a knee bends, a cape slides. A statue holds the pose the sculptor gave it.

On this page a product gets a row only when the maker or the listing calls it a statue, and only from makers we track as licensed. Busts and small figurines have their own pages in our plan, so they're not mixed in here. The table is sorted by stated height, tallest first.

"Statues" means a lot of things on a search

Type "statues" into a search box and you'll get garden angels, a concrete deer for the lawn and a lion for the front step. We leave all of that out. This page is about the indoor kind: character statues made for a shelf.

That's why our table is short. When we pulled the data in October 2026, four statues made it through the filter, from three makers: McFarlane Toys, Iron Studios and MegaHouse. As more listings check out, more rows show up. We'd rather show four rows we can stand behind than forty we can't.

What's in our statues table

Here are the four, in table order, per the listings:

• McFarlane Toys, DC Direct The Joker by Jason Fabok 1:6: PVC, 11.3 in, 1/6 scale, base included
• McFarlane Toys, Spawn #1 (Black White & Red All Over) 1:10 Resin Statue: polystone/resin, 10 in, 1/10 scale, limited edition, hand-numbered
• Iron Studios, Power Rangers Blue Ranger 1/10: 7 in, 1/10 scale
• MegaHouse, Godzilla -1.0 Petitrama DX: no height or scale stated

Look at the first two rows together. The 1/6 statue lists 11.3 in. The 1/10 statue lists 10 in. Scale and height don't move in lockstep, because characters aren't all the same size and bases add height too. That's the reason this page leans on the height column first.

The MegaHouse row sits at the bottom only because its listing doesn't state a height. A blank lands last in a sort. It's not a ranking.

What to look at on a statue listing

Statue listings are usually more complete than figure listings. In our sample, the form, the material and the series were filled in on almost every one. Here's how to read them.

Height: the first number to check

Height tells you whether the statue fits the shelf gap. Read it as the full height, base and all, unless the listing says otherwise. In our table the stated heights run from 7 in to 11.3 in.

If a listing gives only a scale and no height, check the maker's own product page. Some makers list full dimensions there. One Iron Studios Art Scale 1/10 page we opened lists height, width and depth, which is everything a shelf needs.

Depth and the base: the number most people skip

Here's my one opinion on this page: measure the shelf depth before you buy a statue, not just the height of the gap.

The reason is the base. Statues usually stand on a base that's part of the sculpt, like a rock, a rooftop or a pile of rubble. Bases spread out. A cape or a raised arm can stick out past the base, too. A standard bookcase shelf that holds a row of 6-inch figures may not hold a statue with a wide base, even when the height fits. The maker's page is where width and depth live, when they're listed.

Marisol's take: "A base is a footprint. Measure the footprint, then the figure. That's the order on a property, and it's the order on a shelf."

Material: PVC or polystone

Two materials show up in our table.

PVC is the plastic most figures are made of. The McFarlane Toys Joker statue lists PVC.

Polystone, which listings often call resin, is the other. The McFarlane Toys Spawn #1 statue lists polystone/resin. Iron Studios names polystone on its Art Scale 1/10 product pages and describes a hand-painted finish.

The material is a fact for the listing to state, not something we'll guess from a photo. If it isn't listed, the column stays empty. The Iron Studios and MegaHouse rows in our table don't state one.

Scale: 1/6 versus 1/10

Scale is a fraction of the character's size. A 1/6 statue is one sixth, a 1/10 is one tenth. Iron Studios uses "Art Scale 1/10" as the name of a line on its own pages.

The math is quick. A character drawn as 6 ft tall is 72 in. At 1/6 that's 12 in. At 1/10 it's about 7.2 in. So a 1/6 statue is usually the bigger piece. But a short character at 1/6 can come out smaller than a tall one at 1/10. Use scale to match statues to each other. Use height to match a statue to a shelf.

Base included

Most statues have a base built into the sculpt. Our data marks it when the listing says so. The Joker statue lists a base included. Iron Studios' Art Scale page we opened describes a themed display base. If the base column is blank, the listing didn't say, so look at the photos and the maker's page.

Limited or numbered editions

Some statues are made in a set number of pieces, and each piece carries its number. The Spawn #1 statue lists "Limited Edition, hand-numbered." The listing doesn't give the edition size, so we don't print one.

A number on the base tells you which piece you have. That's all it tells you. We don't talk about rarity or value on this site, and a number on a base doesn't change that.

Series and character

The series and character columns show what the listing says, spelled the way the listing spells it: "DC Comics (Batman: Three Jokers)," "Spawn," "Power Rangers," "Godzilla Minus One." We name them and move on. The toy maker is the brand on our pages, not the studio behind the character.

Age label

Statues are display pieces. Most statue listings in our sample that stated an age said 14+ or 15+. The Iron Studios Art Scale page we opened lists an age recommendation of 15. If a listing shows no age, treat the statue as a piece for a grown-up shelf.

Kinds of statues you'll run into

Scale statues. Made at a stated fraction, like 1/6 or 1/10, on a sculpted base. Three of our four rows state a scale.

Diorama-style statues. A character in a small scene, with the base carrying as much of the design as the figure. The MegaHouse Petitrama DX listing calls its piece a statue. The name "Petitrama" is MegaHouse's own.

Polystone statues. Pieces made in polystone, often hand-painted and sometimes numbered. The Spawn #1 statue is the one in our table.

PVC statues. The same idea in PVC. The Joker statue is the PVC row.

Busts, which show only the head and shoulders, and small figurines get their own pages. Life size statues aren't in our table at all.

Handling and display

At the shop we never lift an engine by the carburetor. You lift it by the frame, the part built to take the weight. A statue is the same. Pick it up by the base, not by a cape, an arm or a weapon. The thin parts are the parts that break.

A few habits help:

• Lift by the base: two hands, one under it
• Back from the edge: a wide base needs the full shelf depth
• Out of direct sun: a window shelf is a bad home for paint
• Dust dry: a soft brush gets into the sculpt
• Keep the box: for moving day

Read the maker's care notes for the material. PVC and polystone aren't the same, and the maker knows its own finish.

My statue shelf is the only shelf I never have to fix after a long week. The figures on the shelf above it get re-posed every Saturday, whether they asked for it or not. The statues just stand there and wait for the dust brush.

Safety and small parts

Small parts: Check the age label on the listing. Toys with small parts are a choking hazard for children under 3.

The CPSC bans children's products meant for kids under 3 that have parts small enough to fit its small parts test cylinder. Statues aren't usually children's products at all, but many come with separate weapons, effect parts or base pegs. Keep those with the statue. Put a statue on a low, stable shelf or a high one a kid can't climb to, and keep the base well back from the edge.

Who should skip statues

Skip statues if you like changing the pose. A statue does one thing. For posing, look at action figures elsewhere in this section.

Skip them if your shelves are shallow and you can't move to a deeper one. A wide base on a shallow shelf is a statue waiting for a bump.

Skip them for a young kid. These are display pieces with thin parts, and the ages that are stated run to the teens.

And if you want lots of characters in a small space, a statue is the wrong tool. Anime figures include smaller prize figures, and sofubi are chunky and hollow.

Where to go next

For the whole section, start at figures. For more one-pose figures, see anime figures. The brand catalog lists every figure maker we track.

Measure the shelf depth, lift it by the base, then leave it alone.